MULTIMEDIA 189 UCONNECT SETTINGS C USTOMER P ROGRAMMABLE F EATURES For the Uconnect 3 With 5-inch Display, the Uconnect 5/5NAV With 8.4-inch Display, and Uconnect 5NAV With 12-inch Display The Uconnect system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel. These buttons allow you to access and change the Customer Programmable Features. Many features can vary by vehicle. For Uconnect 3, push the SETTINGS button on the side of the faceplate. In this menu, the Uconnect system allows you to access all of the available programmable features.
Buttons on the faceplate are located below and/or beside the Uconnect system in the center of the instrument panel. In addition, there is a SCROLL/ ENTER control knob located on the right side. Turn the control knob to scroll through menus and change settings. Push the center of the control knob one or more times to select or change a setting. For Uconnect 5, push the Vehicle button, then press the Settings tab on the top of the touchscreen. In this menu, the Uconnect system allows you to access all of the available programmable features. NOTE: 5 Only one touchscreen area may be selected at a time. Your Uconnect system may also have SCREEN OFF and MUTE buttons on the faceplate.
Depending on the vehicle’s options, feature settings may vary. Push the SCREEN OFF button on the faceplate to turn off the Uconnect screen. Push the button again or tap the screen to turn the screen on. When making a selection, press the button on the touchscreen to enter the desired menu. Once in the desired menu, press and release the preferred setting option until a check mark appears next to the setting, showing that setting has been selected. Once the setting is complete, press the Vehicle button to exit to the screen. Pressing the Up or Down Arrow button on the right side of the screen will allow you to toggle up or down through the available settings.
Press the Back Arrow button to exit out of a Menu or certain option on the Uconnect system. For the Uconnect 5 systems, push and hold the Power button on the radio’s faceplate for a minimum of 15 seconds to reset the radio. Uconnect 5NAV With 12-inch Display Touchscreen And Faceplate Buttons 1 — Uconnect Buttons On The Touchscreen 2 — Uconnect Buttons On The Faceplate