GETTING TO KNOW YOUR VEHICLE 41 Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move. If the mirror does not fold automatically, check for ice or dirt buildup at the pivot area, which can cause excessive drag. To reset the power folding mirrors: Fold and unfold them by pushing the button (this may require multiple attempts). This resets them to their normal driving position. P OWER C ONVEX M IRROR S WITCH I F E QUIPPED 2 The Power Convex Mirror Switch is located on the door trim panel, above the power mirror controls. The switch enables the movement of the convex portion of both the driver and passenger outside mirrors.
Power Mirror Movement Power Folding Mirror Switch P OWER F OLDING O UTSIDE M IRRORS F OR S TANDARD A ND T RAILER T OW I F E QUIPPED Resetting The Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: The mirrors are accidentally blocked while folding. The power folding mirrors can be folded rearward and unfolded into the normal driving position. The mirrors are accidentally manually folded/ unfolded (by hand or by pushing the power folding mirror switch). The switch for the power folding mirrors is located between the power mirror switches L (left) and R (right).
Push the switch once and the mirrors will fold in, push the switch a second time and the mirrors will return to the normal driving position. Power Convex Mirror Switch The mirrors come out of the unfolded position. To adjust the convex portion of the outside mirrors, push the Power Convex Mirror Switch. Then, select the mirror you want to adjust by using the L (left) or R (right) buttons. If the mirror is manually folded after a powered cycle, a potential extra button push is required to get the mirrors back to the normal driving position. The mirrors shake and vibrate at normal driving speeds.