FCA 2022 Chassis Cab — Diesel Particulate Filter (DPF) Messages

90 GETTING TO KNOW YOUR INSTRUMENT PANEL Commercial Settings — If Equipped D IESEL M ESSAGES A ND W ARNINGS Perform Service — Your vehicle will require emis­ Commercial Settings allows the driver to set and recall additional features when the transmission is in PARK. Diesel Particulate Filter (DPF) Messages sions maintenance at a set interval. To help remind you when this maintenance is due, the instrument cluster display will display “Perform Service”. When the “Perform Service” message is displayed in the instrument cluster display it is necessary to have the emissions maintenance performed.

Emissions maintenance may include replacing the Closed Crankcase Ventila­ tion (CCV) filter element. The procedure for clearing and resetting the "Perform Service" indicator message is located in the appropriate Service Information. The Cummins® diesel engine meets all diesel emissions standards, resulting in one of the lowest emitting diesel engines ever produced. To achieve these emissions standards, your vehicle is equipped with a state-of-the-art engine and exhaust system. These systems are seamlessly integrated into your vehicle and managed by the Powertrain Control Module (PCM).

The PCM manages engine combustion to allow the exhaust system’s catalyst to trap and burn Particulate Matter (PM) pollutants, with no input or interaction on your part. Push and release the up or down arrow button until Commercial Settings displays in the instrument cluster display. Follow the prompts to enter the required PIN and enter the Commercial Settings submenu. NOTE: If your vehicle is equipped with a touchscreen radio, “Commercial Settings” will replace “Vehicle Settings” in the instrument cluster display. The Commercial Settings menu will only include the settings below Ъ ­page­189. Commercial Settings allows you to access the following features (if equipped):

Exhaust System — Regeneration Required Now — "Exhaust Filter XX% Full Safely Drive at Highway Speeds to Remedy" will be displayed in the instrument cluster display if the exhaust particulate filter reaches 80% of its maximum storage capacity. Under conditions of exclusive short duration and low speed driving cycles, your Cummins® diesel engine and exhaust after-treatment system may never reach the conditions required to remove the trapped PM. If this occurs, the “Exhaust Filter XX% Full Safely Drive at Highway Speeds to Remedy” message will be displayed in the instrument cluster display.

If this message is displayed, you will hear one chime to assist in alerting you of this condition WARNING!­ Power Take Off (PTO) A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn. Remote Ignition Idle Control Backup Alarm ParkSense Aux Switches PIN Setup Your vehicle has the ability to alert you to additional maintenance required on your vehicle or engine. The following messages may display in your instrument cluster display: NOTE:

If the vehicle’s PIN is forgotten or not known, see an authorized dealer to have the PIN reset.