TIC LEXION 500 Electric System 03/05 Lex-e-M M-19 Module A35 – Montana 570-520 control unit - with external MONTANA control unit (up to serial no. 582 00051, 581 00026; 580 00028) Pin Function Component Measuring Direction Circuit variable diagram no.
1 Power supply (K69) --- 12 V Input 41s, 4s 2 Lower axle, left-hand side Y114 12 V Output 41s 3 Raise axle, right-hand side Y115 12 V Output 41s 4 Raise axle, right-hand side Y117 12 V Output 41s 5 Lower axle, right-hand side Y116 12 V Output 41s 6 Rotate front attachment to the left Y113 12 V Output 41s 7 Rotate front attachment to the right Y112 12 V Output 41s 8 Raise cutting angle Y110 12 V Output 41s 9 Lower cutting angle Y111 12 V Output 41s 10 Master valve (Montana) Y128 12 V Output 4s 11 Master valve (Working hydraulics) Y77, Y128 12 V Output 4s 12 Oil quantity increase Y118 12 V Output 41s 13 not used --- --- --- --- 14 Earth --- Earth Input 41s 15 Power supply (K69) --- 12 V Input 41s, 4s 16 Left-hand axle angle sensor signal B91 0.25-4.75 V Input 41s 17 Montana cross levelling sensor signal B94 0.25-4.75 V Input 41s 18 not used --- --- --- --- 19 not used --- --- --- --- 20 not used --- --- --- --- 21 CAN Low (Inclinometer) B126-1 - Output 41s 22 not used --- --- --- --- 23 CAN Low (Montana) A41 - Output 06s 24 Earth A41 Earth Output 06s 25 RS 232 --- --- --- 06s 26 RS 232 --- --- --- 06s 27 not used --- --- --- --- 28 Earth --- Earth Input 41s 29 Power supply (K69) --- 12V Input 41s, 4s 30 Right-hand axle angle sensor signal B92 0.25-4.75 V Input 41s 31 Cutting angle sensor signal B93 0.25-4.75 V Input 41s 32 Parking brake signal S93 12 V Input 41s 33 Earth sensors B91, B92, B93, B94, B95, B126 Earth Output 41s 34 not used --- --- --- --- 35 not used --- --- --- --- 36 CAN High (Inclinometer) B126 - Output 41s 37 Power supply (CAN) A41 12 V Output 06s 38 CAN High (Montana) A41 - Output 06s 39 RS 232 (Boot) --- --- --- 06s 40 RS 232 --- --- --- 06s 41 not used --- --- --- --- 42 not used --- --- --- ---