OM2044 Safety - Section 20 Page 20-3 Fire Prevention For Fuel And Oil Fuel, oil, and antifreeze can be ignited by a flame. These fluids are extremely flammable and hazardous. When modifying or repairing the ROPS, always consult your nearest Komatsu distributor. Even with the ROPS installed, the operator must always use the seat belt when operating the machine. Keep flames away from flammable fluids. Stop the engine while refueling. Never smoke while refueling Preventing Injury From Work Equipment Tighten all fuel and oil tank caps securely. Never position any part of your body between movable parts such as the dump body, chassis or cylinders.
If the work equipment is operated, clearances will change and may cause serious bodily injury or death. Refuel and maintain oil in well ventilated areas. Keep oil and fuel in a designated location. DO NOT allow unauthorized persons to enter. Precautions For Optional Attachments When installing and using optional equipment, read the instruction manual for the attachment and the information related to attachments in this manual. DO NOT use attachments that are not authorized by Komatsu, or the authorized regional Komatsu distributor. Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine.
Any injuries, accidents, and product failures resulting from the use of unauthorized attachments will not be the responsibility of Komatsu America Corp., or the authorized regional Komatsu distributor. ROPS Precautions The Rollover Protection Structure (ROPS) must be properly installed for machine operation. Precautions When Starting The Machine The ROPS is intended to protect the operator if the machine rolls over. It is designed not only to support the load of the machine, but also to absorb the energy of the impact. Start the engine from the operator’s seat, only. Never attempt to start the engine by shorting across the starter terminals.
This may cause fire, or serious injury or death to anyone in the machine’s path. ROPS structures installed on equipment manufactured and designed by Komatsu fulfills all of the regulations and standards for all countries. If it is modified or repaired without authorization from Komatsu, or is damaged when the machine rolls over, the strength of the structure will be compromised and will not be able to fulfill its intended purpose. Optimum strength of the structure can only be achieved if it is repaired or modified as specified by Komatsu.