MAINTENANCE 8.1 8.1.2 Service Access Radiator / fan service access 1. 2H Radiator / Cooling Fan Access to the back side of the radiator and the engine cooling fans is gained by opening the rear door, removing the retaining bolt and swinging the radiator open, away from the door. (fig. C2498). Be sure to check for possible electrical and cooling hose clearance while swinging the radiator from the door. C2498 1. 2J Oil Reservoir Hydraulic reservoir sight gauge The oil reservoir is located at the rear, left side of the loader. It is part of the mainframe structure. The reservoir level is accessed by opening the rear door and visually checking the sight gauge. (fig. C2354).
The reservoir fill is located at the top of the reservoir. The hydraulic filter is also located here. C2354 Hydraulic oil filter 1. 2K Engine Oil fill The engine is accessed by opening the rear door and rais- ing the engine compartment cover. (fig. C2672). The oil level dipstick is located next to the alternator assembly. Oil fill is located on top of the engine rocker arm cover. The engine is equipped with a remote line for draining the engine oil. The oil filter and fuel filter are located to the lower left of the engine assembly. Oil check Filters Oil drain line C2672 Fuse, relay and circuit breaker access knob 8 1. 2L Fuse panel The fuse panel is located in the engine compartment.
Open the rear door and raise the engine compartment cover. Open the panel by removing the retaining bolt or knob. A decal is located inside the panel showing proper fuse size and use. C2485 8-5