24. SERVICE PROCEDURE 24.2.12 ADJUST AMOUNT OF BLADE TILT It is dangerous if the work equipment is moved by mistake when adystlng the tilt. Set the work equipment in a stable position, stop the engine, and lock the lever securely. 1*wARN’NG7 ADJUSTMENT 1. Raise the blade approx. 400 to 500 mm (16 - 20 in) off the ground and apply block to the frame. 2. By shifting the blade control lever to R.H. or L.H., tilting 444 (442) mm 117.48 (17.40) in] at right side or 427 (418) mm L16.81 (16.46) in1 at left side of blade is possible. 3. Lengthen (e) of brace @ by turning bar @ at one side of the blade until 680 (600) mm L26.77 (23.62) in1 of maximum tilting can be obtained.
* Tilt the blade up within a range of 680 (600) mm. 126.77 (23.62) in] ( 1: D58P-1 3-36