24.7 EVERY 1000 HOURS SERVICE Maintenance for every 50,250, and 500 hours should be carried out at the same time. 24.7.1 LUBRICATING Add grease to the grease fittings marked by arrows. 1. Universal joint (2 points) 2. Diagonal brace (2 points) 870 24.7.2 CHANGE OIL IN TRANSMISSION CASE (INCL. TORQUE CONVERTER CASE), CLEAN STRAINER a WARNING The oil is at high temperature immediately after the machine has operated. Wait for the oil to cool down before starting the operation. Prepare the following. l Container to catch drained oil: Min. 34 L? (8.98 US gal, 7.48 UK gal) capacity l Socket wrench l Refill capacity: 34 J? (8.98 US gal, 7.48 UK gal) 1.
Remove the cover at the bottom of the machine, and set the container to catch the oil under drain plugs 0 and 0. 2. Remove drain plugs @ and @ slowly to avoid getting oil on yourself, and drain the oil. After draining the oil, tighten the drain plugs. 3. Remove bolt 0, then remove cover @ and take out the strainer. 3-55