9. POSITION FOR ATTACHING SAFETY LABELS 1. Cautions for checking engine room (09667-03000) 5. Warnings for leaving operator’s seat (09654-03000) WHILE ENGINE IS RUNNING: OBSERVE THE FOLLOWING CAUTIONS WHEN STARTING THE MACHINE OR WHEN YOU LEAVE OPERATOR’S SEAT AFTER PARKING THE MACHINE: 1. SET THE GEARSHIFT LEVER INTO NEU- TRAL POSITION AND LOCK IT WITH THE SAFETY LEVER WHEN APPLICABLE. 2. LOCK THE BRAKES. 3. LOWER THE WORKING EQUIPMENT TO THE GROUND AND LOCK THE LEVER. 2. KEEP AWAY FROM FAN AND FAN-BELT. 1. DO NOT OPEN COVER. 09667-03000 --I 2. Warnings for opening radiator cap (09668-03000) 09654-03000 - 6.
Cautions before operating machine (09651-03000) DO NOT LOOSEN CAP WHEN WATER TEMPERATURE IS HIGH. IF LOOSENED, BOILING WATER MAY GUSH OUT BECAUSE OF HIGH INTERNAL PRESSURE. BEFORE OPERATING MACHINE, READ OPERATION MMANUAL CAREFULLY. 09668-03000 - 09651-03000 3. Cautions for inspection and maintenance (09173-03000) 7. Cuations for opening hydraulic tank cap (09653-03000) WHEN CARRYING OUT MAINTE- NANCE. 1. PARK THE MACHINE ON LEVEL GROUND. ALWAYS STOP ENGINE WHEN RE- MOVING CAP. DO NOT LOOSEN CAP WHEN OIL TEMPERATURE IS HIGH. IF LOOS- 2. LOWER WORKEQUIPMENTTOTHE GROUND, AND LOCK THE LEVER. 3.
DO NOT GO UNDER MACHINE WHEN IT IS RAISED BY THE WORK SLOWLY OPEN HYDRULIC OIL TANK CAP AND RELEASE INTER- NAL PRESSURE COMPLETELY. DO NOT OPEN DRAIN PLUG WHEN OIL TEMPERATURE IS HIGH. ENED, OIL MAY GUSH OUT. EQUIPMENT. 09173-03000 - 4. Warnings for adjusting track tension (09657-03010) 09653-03000 - 8. Caution for oil filter (09655-30120) TO INCREASE TRACK TENSION. PUMP IN GREASE THROUGH LUBRICATOR. TO SLACKEN IT. RELEASE GREASE BY ROTATING LUBRICATION ONETURN. (FOR TRACK ADJUSTMENT PROCEDURE, READ OPERATION AND MAINTENANCE MANUAL.) DO NOT LOOSEN LUBRICATOR MORE THAN ONE FULL TURN, ALSO BE CARE- FUL NOT TO LOOSEN ANY PARTS OTHER THAN LUBRICATOR.
SINCE THE GREASE IS UNDER HIGH PRESSURE EXCESS LOOS- ENING IS HIGHLY DANGEROUS. RETIGHTEN LUBRICATOR SECURELY AF- TER ADJUSTMENT. CAUTION * AFTER THE FIRST 250 OPERATING HOURS, AND THEREAFTER EVERY 1000 OPERAT- ING HOURS, RENEW THE OIL IN THE HY- DRAULICTANKANDTHEELEMENTINTHIS FILTER. (SEE YOUR OPERATION AND MAINTE- NANCE MANUAL FOR DETAILS.) WHEN RENEWING THE ELEMENT: . REST THE WORK ATTACHMENT ON THE GROUND AND STOP THE ENGINE. 09657-03010 - 09655-30120 - 1-23