11. EXPLANATION OF COMPONENTS 11.3 CONTROL LEVERS AND PEDALS AE0799 11 AE079901 a- AE079891 1. FUEL CONTROL LEVER This lever is used to control the engine speed and output. @ Engine stop position: Lever pushed fully forward. When stopping engine, place lever in engine stop position @ by pushing lever beyond the low idling position @ after pulling the knob @. @ Low idling position: Lever pulled back from position @ to position where operating effort is less @ High idling position: Lever pulled back fully from position @ 2. GEAR SHIFT LEVER This lever changes the transmission gear range.
There are three ranges in both forward and reverse, and the gears can be shifted simply by moving the gear shift lever to the desired position. REMARK If the gear shift lever is not at the neutral position, the engine cannot be started. ~ 9A i AE079960 2-8