19. WEAR PARTS LIST Wear parts such as the filter element, cutting edge, etc. are to be replaced at the time of periodic maintenance or before their abrasion limits. The wear parts should be changed correctly in order to use the machine economically. For part change, Komatsu genuine parts of excellent quality should be used. The parts in parentheses are to be replaced at the same time. Replacement Item Part No.
Part Name O’ty frequency Power line oil filter 281-16-11290 Element 1 (I) Every 500 hours (07000-03098) (O-ring) service Engine oil filter 6136-51-5120 Cartridge 1 Every 500 hours service 1 Fuel filter 600-31 l-8292 Cartridge service Every 500 hours Steering clutch case oil filter 101-60-15171 Element 1 (I) Every 500 hours (07000-02075) (O-ring) Corrosion resistor 600-41 l-l 150 Cartridge 1 service Every 1000 hours Hydraulic oil filter (07000-02080) 130-60-48210 Element (0 ring) 1 (I) service Every 1000 hours 6114-80-7101 Element assembly 1 Air cleaner 600-181-2500 Outer element assembly 1 - Electrical intake air heater 6150-I I-4820 Gasket 2 [D58E-1, IA Blade 130-220-I 510 144-70-11180 Cutting edge End bit (Left) 2 1 Straight tiltdozer] (02091-11205) 144-70-11190 End bit (Right) (Bolt) (4) 1 - (02090-I 1270) (02290-I 1219) (Bolt) (22) (Nut) (26) Blade [D58P-1 13F-227-1581 13F-227-1510 Cutting edge End bit (Left) 2 1 Straight tiltdozer] (02091-11205) 13F-227-1571 End bit (Right) (Bolt) (4) 1 - (02290-I 1219) (02090-I 1270) (Bolt) (Nut) (26) (30) [D58E-1 B Blade 130-220-1510 130-70-41130 Cutting edge Cutting edge 1 1 Angle tiltdozer] 144-70-I 1180 144-70-11190 End bit (Left) End bit (Right) 1 1 (02090-I 1270) (02091-I 1205) (Bolt) (Bolt) (23) (4) (02290-I 1219) (Nut) (27) 3-8