7.1 Fault table Faults T 7-1:
Fault table 7 45 Faults Causes Measures Engine doesn't work on all cy- linders High pressure pipe leaking Check fuel injector/change if necessary Fuel injector defective Check fuel injector/change if necessary Engine has no, or too little, oil pressure Oil level too low Fill up lubricating oil Engine is tilted too far Check engine mounting / reduce inclination Incorrect SAE class or quality of engine lubricating oil Change the lubricating oil (22) Engine has too high oil con- sumption Oil level too high Check oil level and drain if necessary Engine is tilted too far Check engine mounting / reduce inclination Engine smoulders blue Oil level too high Check oil level and drain if necessary (29) Engine is tilted too far Check engine mounting / reduce inclination Engine smoulders white Starting limit temperature not reached 15 Fuel quality does not comply with instruction manual Change the fuel (24) Fuel injector defective Check fuel injector/change if necessary Engine smoulders black Air filter soiled / turbocharger defective Check /change if necessary Air filter maintenance indicator / service gauge defective Check /change if necessary Charge air pipe leaking Check charge air pipe Fuel injector defective Check fuel injector/ change if necessary