To ensure that the information is structured in a user-friendly manner, the service documentation is divided into the op- erator's manual and the workshop manual. The operator's manual includes a general description as well as instructions for all necessary maintenance work. Knowledge of the owner's manual is essential to understand the workshop manual. This is particularly important for safety instructions. The workshop manual describes repairs to the engine and components, which will require more effort and suitably qual- ified specialists to carry out. Note This workshop manual provides notes for trained technicians to maintain our tractors.
Read and observe the information in this documentation. This will help you prevent accidents and safeguard the manu- facturer's warranty. The respective accident prevention rules as well as other generally recognised safety and occupational health rules must be observed. The tractor is built solely for the purpose defined by the implement manufacturer (intended use). Any other type of use is considered unauthorised. The manufacturer bears no liability for any damage resulting from improper use. The user bears this risk alone. Intended use includes maintaining operating, service and maintenance conditions as specified by the manufacturer.
The tractor may only be used, serviced and maintained by people familiar with the equipment and who have been in- formed about the dangers. Ensure that this documentation is available to everyone involved in operating, servicing and maintaining the tractor and that the contents have been understood. Not observing this documentation can lead to faults, engine damage and personal injury, for which the manufacturer assumes no liability. The prerequisite for the tractor being correctly serviced and maintained is the perfect condition and availability of all necessary equipment, standard tools and general workshop equipment as well as special tools.
The use of special tools is restricted to where absolutely necessary, and are displayed both where they need to be used and in a summary at the end of the manual. The tractor must be maintained according to its proper use. Always replace parts with genuine FENDT spare parts! When ordering parts, please provide the chassis number as per the most up-to-date spare parts documentation. The layout of components in this workshop manual matches Epsilon . Only parts approved by the manufacturer for that specific purpose may be used for any alterations. The manufacturer will not accept liability for any damage resulting from unauthorised modifications to the tractor.
Non-compliance invalidates the warranty! Workshops should also refer to documentation on maintenance work and technical data. Once maintenance is complete, take a test drive to ensure the vehicle's correct operation and road safety. We reserve the right to make design changes in light of technical developments. Notes on Register G - Maintenance The assembly/disassembly instructions shown correspond to the design status at the time the workshop manual was drawn up. Further technical development of the product and additions related to different versions may require alternative working processes that do not pose too many difficulties to trained and qualified specialists.
These assembly/disassembly instructions shall be invalidated upon issue of the next version of this document. 3 Notes on documentation 0000 - Overall system/tractor A - General 12 T003503 Version 1 21-04-2009 Check Chassis Range!