P086TI G-DRIVE COOLING SYSTEM ENGINEERING DATA ㅇ Cooling method Fresh water forced circulation ㅇ Water flow 130 liters/min @1,500 rpm ㅇ Water capacity 14 liters ( 3.70 gal.) ㅇ Heat rejection to coolant 17.3 kcal/sec @1,500 rpm (engine only) ㅇ Heat rejection to CAC 4.5 kcal/sec @1,500 rpm ㅇ Pressure system Max. 0.9 kg/cm 2 ( 12.8 psi) ㅇ Air flow 12.1 m 3 /min @1,500 rpm ㅇ Water pump Centrifugal type driven by belt ㅇ Exhaust gas flow 33.9 m 3 /min @1,500 rpm ㅇ Water pump Capacity 150 liters ( 39.6 gal.)/min ㅇ Exhaust gas temp.
580 °C @1,500 rpm at 1,800 rpm (engine) ㅇ Water flow 150 liters/min @1,800 rpm ㅇ Thermostat Wax – pellet type ㅇ Heat rejection to coolant 20.3 kcal/sec @1,800 rpm Opening temp. 71°C ㅇ Heat rejection to CAC 10.8 kcal/sec @1,800 rpm Full open temp. 85°C ㅇ Air flow 16.8 m 3 /min @1,800 rpm ㅇ Cooling fan Blower type, plastic ㅇ Exhaust gas flow 38.8 m 3 /min @1,800 rpm 660.4 mm diameter, 7 blade ㅇ Exhaust gas temp. 530 °C @1,800 rpm ㅇ Max. permissible restrictions ELECTRICAL SYSTEM -. Intake system 220 mmH 2 O initial ㅇ Charging generator 24V x 45A alternator 635 mmH 2 O final ㅇ Voltage regulator Built-in type IC regulator -. Exhaust system 600 mmH 2 O max.
ㅇ Starting motor 24V x 6.0kW ㅇ Battery Voltage 24V CONVERSION TABLE ㅇ Battery Capacity 100 AH (recommended) in. = mm x 0.0394 lb/ft = N.m x 0.737 ㅇ Starting aid (Option) Block heater PS = kW x 1.3596 U.S. gal = lit. x 0.264 psi = kg/cm2 x 14.2233 kW = 0.2388 kcal/s in3 = lit. x 61.02 lb/PS.h = g/kW.h x 0.00162 hp = PS x 0.98635 cfm = m 3 /min x 35.336 lb = kg x 2.20462 Head office 7-11, Hwasu-Dong, Dong-Gu, Incheon, Korea TEL : 82-32-760-1437, 1964 FAX : 82-32-760-1964 Seoul Office Doosan Infracore Co. Ltd., 22nd Floor, Doosan Tower, 18-12, Euljiro 6-ga, Jung-gu, Seoul, Korea. TEL : 82-2-3398-8521~8535 FAX : 82-2-3398-8509 Web site :
www.doosaninfracore.com Printed in March 2006 PS-P086TI-D DOOSAN Infracore Speccifications are subject to change without prior notice