Safety—Operating Precautions Inspect and Maintain ROPS A damaged roll-over protective structure (ROPS) should be replaced, not reused. To maintain the ROPS: Replace missing hardware using correct grade hardware. Check hardware torque. Check isolation mounts for damage, looseness or wear; replace them if necessary. Check ROPS for cracks or physical damage. The protection offered by ROPS will be impaired if ROPS is subjected to structural damage, is involved in an overturn incident, or is in any way altered by welding, bending, drilling, or cutting. If ROPS was loosened or removed for any reason, inspect it carefully before operating the machine again.
TX03679,000179F -19-20APR01-1/1 Add and Operate Attachments Safely Always verify compatibility of attachments by contacting your authorized dealer. Adding unapproved attachments may affect machine stability or reliability, and may create a hazard for others near the machine. is required or recommended. Verify that all connections are secure and attachment responds properly to controls. Carefully read attachment manual and follow all instructions and warnings. In an area free of bystanders and obstructions, carefully operate attachment to learn its characteristics and range of motion. Ensure that a qualified person is involved in attachment installation.
Add guards to machine if operator protection TX03679,00016F0 -19-24JAN07-1/1 1-3-4 071713 PN=25