117 STABILIZERS REF NO. PART NUMBER QTY DESCRIPTION REMARKS SEE FOOTNOTE 1 1. 179-183 3 TAPERED PIN (57.1mm X 195mm) 2. 151-095 4 CYL (4" X 2.25" X 8") 3. 125-781 8 COMPOSITION BUSHING (2.259") 4. 184-031 7 TAPERED INSERT (2.25") 5. 106-345 7 SCREW (M20-2.5 X 50mm) 6. 349-511 3 STABILIZER 349-516 1 FRONT RIGHT STABILIZER 7. 181-974 4 TAPERED INSERT (1.5") 8. 125-772 8 COMPOSITION BUSHING (1.5") 9. 179-241 4 TAPERED PIN (1.500" X 7.20") 10. 115-511 8 KLIP RING (1-1/2") 11. 309-307 1 FRONT STABILIZER PAD SUPERCEDED BY 301-5015, SEE FOOTNOTE 2 301-5015 1 FRONT STABILIZER PAD SEE FOOTNOTE 2 309-308 1 BACK STABILIZER PAD 12.
349-956 2 PAD PIN USED WITH BACK STABILIZER PAD AND FRONT STABILIZER PAD, 309-307 USE WITH FRONT STABILIZER PAD 301-5015, SEE FOOTNOTE 2 13. 105-970 4 FLG BOLT (5/8-NC X 1-3/4, GD8) 14. 179-101 4 TAPERED PIN (57.1mm X 155mm) 15. 115-509 8 INTERNAL SNAP RING (2.440") 16 125-131 4 SPHERICAL BEARING (1.500" ID) 17. 370-040 1 PIN 18. 370-039 1 RETAINER PLATE 19. 106-995 2 FLG LK SCREW (M10-1.50 X 45mm) 20. 106-387 2 FLG LOCKNUT (M10-1.50) 21. 107-001 1 FLG LK SCREW (M10-1.50 X 25mm) 22. 115-001 4 ZERK (02N) 301-2336 2 LONG PAD PIN USE WITH FRONT STABILIZER PAD 301-5015, SEE FOOTNOTE 2 23. 106-509 2 WASHER (1-1/2", HARDENED) NOT SHOWN: FOOTNOTES: 1.
PORTS GO UP ON REAR CYLINDERS, DOWN ON FRONT CYLINDERS. 2. BEGINS WITH S/N CMWJT100__________ NOTE: 02 ID0070134