123 CAB ARM AND ROPS REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 349-172 1 CAB SUPPORT ARM 2. 125-773 2 COMPOSITION BUSHING (1.75") 3. 183-957 2 TAPERED PIN (1.75 X 4.33) 4. 181-975 2 TAPERED INSERT (1.75") 5. 106-470 2 FLG SCREW (M16-2.0 X 40MM) 6. 183-765 2 TAPERED PIN (31.7MM X 110MM) 7. 151-182 1 CYL (2" X 1.25" X 14.25") 8. 125-771 2 COMPOSITION BUSHING (1.25") 9. 180-118 4 BRASS BUSHING (1.25") 10. 181-982 2 TAPERED INSERT (1.25") 11. 106-469 2 FLG SCREW (M12-1.75 X 30MM) 12. 501-125 2 MACHINERY BUSHING (1.784") 13. 349-022 1 ROPS 14. 107-275 12 SCREW (M20-2.5 X 55MM, SOC) 15. 349-487 1 COVER PLATE 320-293 1 COVER 16. 349-485 2 SPACER 17. 349-486 AR SHIM 18.
106-341 2 SCREW (M16-2.0 X 70MM) 19. 106-559 13 SCREW (M12-1.75 X 25MM) 20. 106-340 6 SCREW (M16-2.0 X 50MM) 21. 106-654 1 FLG LK SCREW (M10-1.5 X 16MM) 22. 106-398 6 WASHER (M16, HARDENED) 23. 349-397 3 SHIM 24. 117-789 1 HOSE BAG (4" X 36") 25. 116-788 1 BUFFER 26. 307-683 1 CAB FRAME 599-296 - CAB SPACER KIT 27. 110-375 1 KNOB (1/2-NC, YELLOW) 28. 370-392 1 LOCKOUT PIN 29. 110-239 1 LANYARD CABLE (13.5") 30. 106-542 2 SCREW (M5-0.80 X 16MM, PAN PLPS) 31. 106-850 2 LOCKNUT (M5-0.80) 32. 106-388 2 WASHER (M6) 33. 310-383 1 FORK BRACKET 34. 106-163 2 FLG SCREW (M8-1.25 X 30MM) 35. 106-386 2 FLG LOCKNUT (M8-1.25) USE 277 LOCTITE OR EQUIVALENT:TORQUE TO 310 FT LBS ENDS WITH S/N:
2V2567 BEGINS WITH S/N: 2W0856 USE 277 LOCTITE OR EQUIVALENT SEE FOOTNOTE 1 SEE FOOTNOTE 2 36. 215-1019 1 BATTERY GROUND STRAP NOT SHOWN: FOOTNOTES: 1. USE 2 SHIMS IN TOP HOLES; 1 SHIM IN MIDDLE HOLES 2. THIS KIT IS REQUIRED WHEN INSTALLING CAB FRAME ON UNITS PRIOR TO S/N 2W0856 NOTE: 08 ID0070133