199 PUMP MOUNTING REF NO. PART NUMBER QTY DESCRIPTION REMARKS OBSOLETE, INCL REF NO. 3 1. 194-086 - ENGINE, DEUTZ 194-372 - ENGINE - DEUTZ DIESEL T2 2. 158-490 1 HYDRAULIC PUMP 3. 499-955 - O-RING (ID 3.95, OD 4.25) 4. 106-333 2 SCREW (M12-1.75 X 40MM, 8.8) 5. 149-902 1 HYDRAULIC PUMP (100 CC) 190-764 SEAL REPAIR KIT 6. 105-858 8 BOLT (1/2-NC X 1-1/4") 7. 106-743 8 WASHER (.531, HARDENED) 8. 157-183 2 O-RING (048 D70) 9. 105-319 4 BOLT (3/4-NC X 1-1/2") 10. 106-949 4 WASHER (3/4", HARDENED) 11. 149-901 1 HYDRAULIC PUMP (130 CC) 190-763 SEAL REPAIR KIT 12. 106-383 12 FLG LK SCREW (M10-1.50 X 30MM) 13. 349-001 1 FLYWHEEL HOUSING COVER 14. 105-876 8 SCREW (M10-1.50 X 35MM) 15.
194-777 1 FLYWHEEL COUPLING 16. 106-397 2 WASHER (M12, HARDENED) 17. 149-903 1 HYDRAULIC PUMP (75 CC) OBSOLETE, INCL REF NO. 3 AUX PUMP MOUNTING USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT; TORQUE TO 32 FT LBS OBSOLETE, SEE FOOTNOTE 1 NOT SHOWN: FOOTNOTES: 1.REPLACE WITH FLYWHEEL COUPLING 195-1685. FLAT SIDE OF NYLON FLANGE GOES TOWARD FLYWHEEL. HUB FACE SHOULD MEASURE .080 INCHES FROM END OF PUMP SHAFT, SEE SKETCH. USE LOCTITE 242 OR EQUIVALENT & TORQUE TO 200 FT LBS. NOTE: 06 ID0068693