55 DRILL FRAME REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 305-714 1 DRILL FRAME 2. 349-675 1 FRONT FRAME 314-557 1 FRONT FRAME 3. 106-074 15 SCREW (M16-2.0 X 60MM) 4. 106-442 15 FLG LOCKNUT (M16-2.00, PRV TRQ) 5. 215-1175 3 PROXIMITY SWITCH 6. 106-427 6 SCREW (M5-0.80 X 22MM, SOC) 7. 106-850 6 LOCKNUT (M5-0.80) 8. 105-271 4 SCREW (M10-1.5 X 40MM) 9. 106-098 4 FLG BOLT (3/4-NC X 2", GD8) 10. 370-364 1 STOP PAD 11. 206-076 1 COUPLING 12. 320-442 1 STOW MOUNT 13. 106-564 4 SCREW (M10-1.50 X 100MM) 14. 106-396 4 WASHER (M10, HARDENED) ENDS WITH S/N: 2V2567 SEE FOOTNOTE 2 BEGINS WITH S/N:
2W0856 TORQUE TO 140 FT LBS (190Nm) USE LOCTITE 242 OR EQUIVALENT USE LOCTITE 242 OR EQUIVALENT, SEE FOOTNOTE 1 SEE FOOTNOTE 1 BEGINS WITH S/N: 2W0856 BEGINS WITH S/N: 2W0856 BEGINS WITH S/N: 2W0856 NOT SHOWN: FOOTNOTES: 1. BEGINS WITH S/N: 2W0856, USED ON STEEL TRACK MODELS ONLY ON UNITS PRIOR TO S/N: 2W0856 2. WHEN USING DRILL FRAME ON UNITS PRIOR TO S/N: 2W0856 IT WILL BE NECESSARY TO REPLACE 320-588 WITH 349-875 NOTE: 05 ID0068671