61 FRONT WRENCHES BEGINS WITH S/N CMWJT100LB0000037, CMWAT100LA0000005 REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 115-003 1 ZERK (1/4-NF, STR) 2. 184-031 2 TAPERED INSERT (2.25") 3. 106-345 2 SCREW (M20-2.50 X 50MM) 4. 106-666 8 SCREW (M16-2.0 X 65MM, 10.9) 5. 349-958 - JAW BLOCK USE LOCKTITE 680, TORQUE TO 200 FT-LBS 319-910 4 JAW BLOCK SEE FOOTNOTE 1 SEE FOOTNOTE 1 319-856 8 GRIPPER INSERT 6. 349-884 8 GRIPPER INSERT SEE FOOTNOTE 1 JT100, SEE FOOTNOTE 1 375-0002 8 GRIPPER INSERT AT100 JT100 AT100 301-1166 8 INSERT RETAINER (AT) 7. 370-028 8 INSERT RETAINER 8. 349-190 8 PIN 9. 115-499 16 KLIP RING (1.000") 10. 151-176 4 CYL (6.00" X 4.00" X 3.00") 11.
106-639 8 SCREW (M10-1.50 X 160MM) SEE FOOTNOTE 2 12. 106-442 6 FLG LOCKNUT (M16-2.0 PRV TRQ) 13. 349-675 - FRONT FRAME 314-557 - FRONT FRAME 300-5342 - FRONT FRAME 14. 370-135 1 RETAINING RING 15. 106-333 9 SCREW (M12-1.75 X 40MM, 8.8) 16. 179-183 1 TAPERED PIN (57.15MM X 195MM) 17. 179-016 1 TAPERED PIN (57.15MM X 215MM) 18. 125-781 2 COMPOSITION BUSHING (2.259") 19. 349-192 AR SHIM (5.03 ID, 12.12 OD) 20. 370-275 1 ROTATION CLAMP 21. 370-276 1 STATIONARY CLAMP 22. 151-158 1 CYL (4" X 2.25" X 6") 23. 116-879 2 RUBBER CUSHION 24. 166-815 1 KEY (3/4" X 4") 25. 106-645 4 SCREW (M12-1.75 X 110MM, 10.9) 26. 370-281 2 CAP TORQUE TO 80 FT-LBS 27. 106-415 8 WASHER (.406") 28.
106-758 8 LOCKNUT (M10-1.5) 29. 115-005 1 ZERK (1/4-NF, 90) NOT SHOWN: FOOTNOTES: 1. 319-856 IS INTERCHANGABLE WITH 349-958 & 319-910 JAW BLOCKS. 349-884 MAY BE USED WITH 319-910 BY ADDING CHAMFERS TO CLEAR DOVETAIL RADIUS IN JAWBLOCK. 2. 349-958 REQUIRES REF. 11 106-079 QTY. 4 PER JAW BLOCK. NOTE: 04 ID0226407