. OPERATION EXPLANATION OF COMPONENTS machine monitor mode selector switch 1. It will Once the telephone number is input, the input number will be displayed next time. 4. A maximum of 12 digits can be displayed for the telephone 3 - 31 INPUT METHOD FOR TELEP When an error for action cod e "E03" occurs, it is possible to display the telephon 1. Press the () of the ma chine monitor mode selector s witch 1 and display "O PERATION INFO 2. Press the (>) or ( selector switch 2 to displ 3. change to the display in rsor is displayed at the input po sition. Press the (>) or ( achine monitor mode selector s witch 2 and select the number to input from "0 to 9".
For spaces After inputting the desire monitor mode selector position for the next num 5. Repeat the procedure in Step 4 until the last digit. At th e last digit, p ress () o f machine m onitor mode se lector switch 1 to return to the previous screen. If there is a mistake in the input or the input is to be stop ped, press ( ) of mach ine monitor mode selector s witch 1 to return to the previou s screen. 6. When completing the op eration, press () of machine monitor mod e selector switch 1 twice or t urn the st arting switch OFF.