. OPERATION EXPLANATION OF COMPONENTS RPM SET MODE SELECTOR SWITCH This switch (17) is used to switch the power for the RPM SET system ON-OFF and to select the RPM SET mode. Position (A): The automatic mode is selected and the indicator on the (A) side of the switch lights up. Position (B): OFF The electric power for the RPM SET system is shut off and the indicator of the switch goes out. Position (C): The manual mode is selected and the indicator on the (C) side of the switch lights up. 3 - 45 REMARK Use the RPM SET mode selector switch only for ON/ system. Use the RPM SET switch to set the engine speed.
OFF operations of the electric power for the RPM SET n the RPM SET mode selector switch OFF. When cancelling or not using the RPM SET system, tur After starting the engine, the power remains OFF wher ever the position of this switch is. If starting the e ngine when the switch is in the position (A) or (C), turn it OFF once and then press the position (A) or (C) again . AUTO mode Once the accelerator opening angle has been set, it can b e canceled by operating the accelerator pedal or brake pedal. If the back of the switch is pushed (RESUME/DECEL) in t he temporary cancel condition, the accelerator op ening angle will be restored to the position before the temporary cancel.
he accelerator pedal is fully released, if the accelerator After the accelerator opening angle has been set and t pedal is depressed beyond the set opening angle, th e engine speed will rise and the setting is temporarily ollows only the accelerator pedal. canceled. During temporary cancel, the engine speed f If the accelerator pedal opening angle is set and the brak e pedal is depressed, the setting is temporarily can celed and the engine speed follows only the accelerator peda l. REMARK r RPM SET pilot lamp lights up. the RPM SET switch (SET/ACCEL) is pressed, the the new value for the accelerator opening angle.
ps, the accelerator opening angle saved in memory is e switch (RESUME/DECEL) is depressed. If the temporary cancel is actuated, the machine monito If the temporary cancel is actuated and the front of accelerator opening angle at that point is maintained as the new value for the accelerator opening angle. If the temporary cancel is actuated and the engine sto deleted, and it cannot be restored even if the back of th