7. Slide red cover over positive battery cable. Check Tire Pressure Check tire pressure. (See Checking Tire Pressure in the SERVICE MISCELLANEOUS section.) Adjust Mower Deck Level Adjust mower deck level. (See Adjusting Mower Level in the OPERATING section.) Check Engine Oil Level Check engine oil level. (See Checking Engine Oil Level in the SERVICE ENGINE section.) Check Machine Safety System Perform safety system check to make sure the electronic safety interlock circuit is functioning properly. Perform all tests. (See Testing Safety System in the OPERATING section.) Break In Electric Engagement Clutch (If Equipped) 1. Start engine and move machine to flat level surface. A B MX27229 2.
Push throttle lever (A) up to full throttle position. Assembly - 10 ASSEMBLY 3. Engage 10 second 4. Diseng 5. Repeat B NOTE: Cl A MX7686a 4. Connect positive (+) battery cable (A) to battery. 5. Connect negative (–) battery cable (B). 6. Apply general purpose grease or silicone spray to terminal to help prevent corrosion. attachment engagement switch (B) and allow mower to run for s. age attachment engagement switch and wait 10 seconds. steps 3 and 4 for 12-15 cycles. utch is now properly burnished.