Operation 3.3. Operation Adjusting the steering column Do not change the angle of inclination of the steering column while you are driving, since this may lead to severe accidents! Stop the machine, before you change the angle of inclination of the steering column. You may use this lever for continuous adjustment of the steering column’s (1) angle of inclination. (Adjustment range 4.921 inch (125 mm)) Proceed in the following manner: 1. Release the locking lever (2). 2. Adjust it in such a way that you can reach the steering wheel from a comfortable seating position while at the same time having an optimum view of the work unit. Hold the steering wheel in this position. 3.
You can lock the steering column in this position by tightening the locking lever again. Adjusting the armrest Proceed as follows to adjust the height of the armrest: 1. Loosen the screw (1). 2. Either pull out or push back the armrest to reach the multifunctional lever. Your forearm should rest on the armrest at an angle of 90° to your upper arm. 3. Re-tighten the screw (1). WA100M-5 – VEAM280201 3-43 WARNING WARNING