3.3. Operation Operation 3.3.7. Stopping the machine Avoid abrupt stopping. Proceed as follows, if you want to stop the machine: 1. Release the accelerator pedal and press down the brake pedal. 2. Set the drive direction switch into its neutral position 'N'. 3. Apply the parking brake. 4. Lower the work unit onto the ground. Unintentional activation of the multifunctional-lever or moving of the equipment may lead to accidents! Before you leave the cab, turn the locking lever for the work hydraulic system into position '1'. As a result, the work hydraulic system is blocked. 5.
Protect the work hydraulic system against unintentional activation by turning the locking lever of the work hydraulic system into position ‘1’.. Position 1 = working hydraulics locked Position 2 = working hydraulics released Parking the machine on a slope Whenever possible, stop the machine on level ground. If you have to park the machine on a slope, it is required that you park it in such a way that the front section (work unit) points downhill. Lower the work unit onto the ground (1). Block the wheels with wheel chocks (2). 3-54 WA100M-5 – VEAM280201 WARNING WARNING