Operation 3.2. Description of the individual elements 1. Control lamp in hazard warning lights switch The control lamp flashes when the hazard warning lights are switched on. 2. Driving direction switch indicators The indicators of the driving direction switch indicate which driving direction you have selected: left arrow lights up: Machine drives backwards (driving direction switch in 'R' position) GK100836 right arrow lights up: Machine drives forward (driving direction switch in 'F' position) If the driving direction switch is set to the 'N' neutral position, both control lamps will go out. 3.
Direction indicator control lamp The direction indicator control lamp flashes if you have switched on the right or left direction indicators or the hazard flashers. If the direction indicator control lamp flashes in very short intervE.C.S.S., a fault has occurred in the direction indicator system. In this case, proceed as described in chapter "4.6. Other troubles" on page 4-10. GK100837 4. Air preheater control lamp The control lamp lights up, if you set the start switch to the 'I' operating position and if the air preheater is running. You can start the engine, after the control lamp has gone out.
In the event of temperatures below 32°F (0°C), the pilot lamp again lights up after the start, for 30 s. GK100838 5. Heated rear windscreen indicator The control lamp of the heated rear windscreen lights up, if you have switched on the heated rear windscreen. GK100839 WA100M-5 – VEAM280201 3-9