3.2. Description of the individual elements Operation 13. Variable shift control switch – option This variable shift control switch allows a stepless determination of the maximum speed in all speed range positions. Turn the dial to the right to increase the setting; turn it to the left to decrease the setting. The conditions for use may differ according to the condition of the road surface. 14. 15. 15. Switch for inside lighting G0070163.eps The inside lighting has three different switch settings: Switch setting 1 = Steady light Switch setting 0 = Off Switch setting 2 = Steady light NOTE You can also switch on the inside lighting, if the start switch is in stop position '0'.
For this reason, switch off the inside lighting before you leave the driver’s cab. 16. Battery main switch – option NOTE Do not operate the battery main switch with the engine running! The battery main switch (1) disconnects the power supply of the machine’s electrical system. The switch is situated next to the battery in the rear section of the machine. If the machine is to be taken out of service for a longer time, you must switch off the battery main switch and remove the ignition key. 17. E.C.S.S. switch (with control lamp) – option The E.C.S.S. switch is only installed in machines which are provided with E.C.S.S.. If you switch on the E.C.S.S.
with this switch, the green control lamp lights up in this switch. If the machine drives faster than 3.10 mph (5 km/h), the E.C.S.S. is automatically activated and the E.C.S.S. control lamp lights up on the instrument panel. If the machine drives slower than 3.10 mph (5 km/h), the E.C.S.S. is switched off and the control lamp on the instru- ment panel goes out. However, the control lamp in the E.C.S.S. switch remains lit in green. 3-20 WA100M-5 – VEAM280201 1