27 RADIATOR JT4020 1. 306-822 1 RADIATOR 111-091 1 RADIATOR CAP 2. 106-142 3 SCREW (M10-1.50 X 65MM) 3. 116-727 3 SHOCK MOUNT 4. 105-223 3 WASHER (3/8") 5. 106-387 3 FLG LOCKNUT (M10-1.50) 6. 350-506 - FRONT ENGINE MOUNT 7. 110-134 4 WORM CLAMP (2.062" TO 2.750") 8. 116-706 1 LOWER COOLANT HOSE 9. 116-705 1 UPPER COOLANT HOSE 10. 194-737 1 FAN GUARD (24") 11. 106-561 4 LOCKNUT (M8-1.25, PRV TRQ, 10.9) 12. 105-118 4 WASHER (3/8") 13. 354-436 1 RADIATOR BRACKET 14. 106-632 2 FLG LK SCREW (M12-1.75 X 35MM,SER) 15. 364-229 1 OVERFLOW TANK (3 QT) REF NO. PART NUMBER QTY DESCRIPTION REMARKS SEE FOOTNOTE 1 190-053 - POLY-PATCH TANK REPAIR KIT 16. 107-334 2 SCREW (M8-1.25 X 25MM,BUT SOC) 17.
105-117 4 WASHER (5/16") 18. 106-561 2 LOCKNUT (M8-1.25, PRV TRQ, 10.9) 19. 115-349 1 GROMMET (1/2") 20. 105-940 2 WASHER (5/8") 21. 115-381 AR BULK HOSE (1/4", SOLD PER 1") 110-765 1 CAP (2-1/4") SEE FOOTNOTE 2 SEE FOOTNOTE 1 USE 1 @ 39" FOOTNOTES 1. FAN MUST BE CENTERED IN DIAMETER OF RADIATOR SHROUD OPENING. ROUTE OVERFLOW HOSE THROUGH HOLE AND GROMMET (115-349) IN TOP HOOD. 2. ONE OF THESE WASHER (106-916) SHOULD BE PLACED BETWEEN NUT (106-561) AND OVERFLOW TANK (364-229), TWO PLACES. ONE OF THE WASHERS SHOULD BE PLACED BETWEEN OVERFLOW TANK AND HOOD STIFFENER PLATE, TWO PLACES. NOTE: T 805-434