PRECAUTIONS FOR OPERATION SAFETY PARKING MACHINE G Park the machine on firm, level ground. G Select a place where there is no hazard of falling rocks or landslides, or of flooding if the land is low. G When leaving the machine, set safety lock lever (1) to the LOCK position, check that the body control pedal is locked, then stop the engine. G Always close the operator's cab door, and use the key to lock all the equipment in order to prevent any unauthorized person from moving the machine. Always remove the key, take it with you, and leave it in the specified place. G If it is necessary to park the machine on a slope, always do as follows.
G When parking on a slope, make sure that the angle of the slope is less than 10є. G Put blocks under the tracks to prevent the machine from moving. 2-28