OPERATION - Transmission Power Take-off (PTO) (option) reflect the appropriate transmission mode: N or P . The PTO is geared to the transmission torque converter, so the PTO will run at speeds proportional to engine rpm. 1. Bring the vehicle to a complete stop and apply the parking brake. NOTE The engine will not start if Neu- tral (or Park) is not selected on the gear-shift lever. NOTE When instructed to set the transmission mode or gear, press the service brake while selecting a new transmission mode using the gear-shift lever. If the gear display does not show a solid N (or P ), the ap- propriate gear has not yet been obtained.
WARNING 4 Apply parking brake and follow vehicle manufacturer parking instructions. Fail- ure to follow these instructions could cause unintended vehicle movement re- sulting in death, serious injury or dam- age to property. NOTE Engine Shutdown The information provided in this topic is intended to enhance or amend the Engine Shutdown Procedure, Stopping the Vehicle, and Final Stopping Procedures located in the Engine Operator's Manual and Chassis Operator's Manual specific for your vehicle. Familiarize yourself with the information in this topic, and make the appropriate adjustments to those procedures, if necessary, when shutting down the engine.
If your vehicle has a Park setting, when instructed to set the transmission mode to Neutral ( N ), Park ( P ) or Neutral ( N ) may be selected. The Gear Display will Neutral (or Park) should al- ways be reached before initiat- ing power down, except in cas- es of emergency. 2. Select N (or P ) on the Gear Shift lever. 3. Select the transmission PTO switch. 4. Raise engine speed as required to operate PTO. Transmission Power Take- off (PTO) (option) NOTE The transmission may have a PTO installed. Engaging the PTO differs if it is operating in either a mobile or a stationary application. Use the transmission PTO switch to dis- engage the PTO. Stationary PTO Operation 26 Y53-1331 (6/21)