5 Maintenance measures Maintenance schedule Maintenance Stage Activity Measure Page E10 The measures are listed in chapter 3. 25 E20 Check Lubricating oil level (if necessary top up) 39 Coolant level (top up if necessary) 26 Suction air filter/dry air filter (maintain in accordance with maintenance indicator) 52 E30 Replace Lubricating oil An lubricating oil application/change strategy adapted optimally to the individual engine application type can be created, for example, with the DEUTZ oil diagnosis. Ask your DEUTZ partner.
32 / 39 Lubricating oil filter/insert (every time the lubricating oil is changed) 40 Coolant (additive concentration) 48 Fuel pre-cleaner / fuel pre-filter (change filter insert if necessary) 45 59 53 43 Fuel pre-filter with water trap (renew the filter insert if necessary).
If the warning system responds (lamp/horn), the 45 Suction air filter/dry air filter (maintain in accordance with maintenance indicator) 52 56 Control piston clearance of exhaust return (optional) 58 53 37 Check valve in the fuel return line (for mechanical injection system) Engine mounting (tighten, replace if damaged when necessary) Charge air cooler entry area (drain lube oil/condensate) Fastenings, hose unions / clips (renew if damaged) Engine tightness (visual inspection for leaks) Stage Activity Measure Page E10 The measures are listed in chapter 3.
25 E20 Check Lubricating oil level (if necessary top up) 39 Coolant level (top up if necessary) 26 Engine tightness (visual inspection for leaks) Suction air filter/dry air filter (maintain in accordance with maintenance indicator) 52 E30 Replace Lubricating oil An lubricating oil application/change strategy adapted optimally to the individual engine application type can be created, for example, with the DEUTZ oil diagnosis. Ask your DEUTZ partner.
32/39 Lubricating oil filter/insert (every time the lubricating oil is changed) 40 Check Coolant (additive concentration) 48 Clean Fuel pre-cleaner / fuel pre-filter (change filter insert if necessary) 45 Charge air cooler entry area (drain lube oil/condensate) Crankcase breather valve Check valve in the fuel return line (for mechanical injection system) Cold starting device Battery and cable connectors 59 V-belts (retension or renew if necessary) 53