6 Setting work Servicing and maintenance works 57 Tightening torque 22 Nm z Then set the second valve on the rocker arm as described above. z Perform the setting procedure on every cylinder. z Remount the cylinder head cover with a new gasket in the reverse order of disassembly. z Tighten screws. Valve clearance IN Inlet valve 75° + 10° TD/TCD 2012 EX Outlet valve 120° + 10° Valve clearance IN Inlet valve 90° + 10° TD/TCD 2013 EX Outlet valve 150° + 10° z Secure the rotation angle disc against twisting. z Turn rotation angle disc clockwise to the stop (rocker arm without clearance) and set scale to zero. z Tighten locking nut. 4 2 5 Tightening torque 20 Nm EX IN 3 tion.
z z z z 1 1 Lock nut 2 3 4 Insert 5 Magnet Set inlet valve EX IN 1 2 3 4 5 Valve clearance IN Inlet valve 75° + 10° TD/TCD 2012 EX Outlet valve 120° + 10° Valve clearance IN Inlet valve 90° + 10° TD/TCD 2013 EX Outlet valve 150° + 10°