9 Engine and setting data Technical data Engine type Dimension TD 2012 L04 2Vm TCD 2012 L04 2Vm TCD 2012 L04 2V TCD 2012 L06 2V *specified lubricating oil filling volumes apply for standard versions. In engines which deviate from the standard, for example different lubricating oil pans/dipstick variants The lubricating oil dipstick mark is always decisive.
© 2009 73 Lubricating oil change volume (with filter) [l] 15,5* 26,5* Weight without cooling system according to DIN 70020-A [kg] 380 400 400 510 V-rib belt tensioning Automatic tensioning spring-loaded clamping roller Permissible maximum combustion air temperature after charge air cooler [°C] 50 V-belt tension Pre-tensioning/Re-tensioning Lube oil temperature in the lube oil tray, maximum [°C] 125 Lubricating oil pressure minimum (low idle, engine warm) [kPa/bar] 80/0,8 V-belts AVX 11 (width:
11 mm) [N] 650±50/400±50 Engine type Dimension TD 2012 L04 2Vm TCD 2012 L04 2Vm TCD 2012 L04 2V TCD 2012 L06 2V Lubricating oil change volume (with filter) ≈ [l] 15,5* 26,5* Lube oil temperature in the lube oil tray, maximum [°C] 125 Lubricating oil pressure minimum (low idle, engine warm) [kPa/bar] 80/0,8 Permissible maximum combustion air temperature after charge air cooler [°C] 50 V-belt tension Pre-tensioning/Re-tensioning V-belts AVX 11 (width:
11 mm) [N] 650±50/400±50 V-rib belt tensioning Automatic tensioning spring-loaded clamping roller Weight without cooling system according to DIN 70020-A ≈ [kg] 380 400 400 510 *specified lubricating oil filling volumes apply for standard versions. In engines which deviate from the standard, for example different lubricating oil pans/dipstick variants and/or special inclined versions, the lubricating oil volume may vary. The lubricating oil dipstick mark is always decisive.