5. Press ( ) of machine monitor mode selector switch 1. The screen switches to the display shown on the right. OPERATION “RESET” and “ITEM TO RESET” are displayed on the top line in turn. For details of the items to reset, see “Filter, Oil Replacement Time Display” on page 2-12. 6. When resetting the replacement interval, press (>) or ( machine monitor mode selector switch 2; set the cursor on YES; then press ( ) of machine monitor mode selector switch 1. The time is reset and the screen returns to the previous screen. To abort the operation, set the cursor on NO and then press ( ) of machine monitor mode selector switch 1. 7.
When resetting the replacement interval for another item, repeat the procedure from Step 4. After completing the resetting operation, press ( ) of machine monitor mode selector switch 1 twice or turn the starting switch OFF. Entering Telephone Number Use this function to input the telephone number. It is possible to display the telephone number on the right side of “CALL” displayed on the character display when action code E03 is generated. 1. Press ( ) of machine monitor mode selector switch 1 to display “ODO” (odometer). 2. Press (>) or ( display “TEL.” WA430-6 2-35