Komatsu — Clothing and Protective Equipment

SAFETY Safety at Job Site Before starting operations, thoroughly check the area for any unusual conditions that could be dangerous. Check the terrain and condition of the ground at the work site, and determine the safest method of operation. Make sure that you know if there are any buried utility lines under the work site. When working on public roads, position flagmen and erect barriers to ensure the safety of passing traffic and pedestrians. Be careful when operating around or near open burning operations. Know where to report an accident or fire. In case of an emergency, have a local emergency phone number available.

Maintain the fire extinguisher on the machine and a second one at the job site. Keep all safety equipment in good working condition. Take action to prevent unauthorized people from approaching the job site. For additional precautions, see “PRECAUTIONS FOR JOB SITE” on page 1-30. Safety Features Be sure that all guards, covers, and mirrors are in their proper place. Have guards or covers repaired immediately, if they are damaged. Use safety equipment such as safety locks and seat belt properly. Never remove any safety features. Always keep them in good operating condition. Always secure the machine in a safe position. See “Parking the Machine” on page 2-149. Seat belt:

See “Seat Belt Inspection” on page 1-11. Improper use of safety features could result in serious bodily injury or death. Be sure the machine has the correct equipment required by local rules and regulations. Clothing and Protective Equipment If your machine is equipped with safety equipment, Komatsu requires this equipment to be used when operating your machine. Do not wear loose clothes or any accessories. If these catch on the control levers or protruding parts, there is danger that it may cause the machine to move unexpectedly. Always wear a hard hat and safety shoes.

If the nature of the work requires it, wear safety glasses, mask, gloves, ear plugs, and safety belt when operating or maintaining the machine. If you have long hair and it hangs out from your hard hat, there is a danger that it may get caught up in the machine. Tie your hair up and be careful not to let it get caught. Check to be sure all personal protective equipment is in good condition before using it. If you will be subject to loud noise, always wear ear protection. 1-12 WA430-6