INTRODUCTION VISIBILITY STANDARD The visibility standards (ISO 5006) for this machine require a view shown in this diagram. Visibility in Immediate Area The visibility of this machine in the area 1 meter (1.1 yd) from the outside surface of the machine at a height of 1.5 m (1.6 yd) is shown in the diagram. The hatched area (A) shows the area where the view is blocked by part of the machine when mirrors or other aids to visibility are installed as standard. Be careful; there are places around the machine that cannot be seen when operating the machine. 12-M Radius Visibility The visibility at a radius of 12 meters (13.1 yd) from the machine is shown in the following diagram.
The hatched areas (B) show the areas where the view is blocked when mirrors or other aids to visibility are installed as standard. Be careful; there are places around the machine that cannot be seen when operating the machine. WA430-6 0-5