107 HYDRAULIC RESERVOIR RT95 / RT115 T3 REF NO. PART NUMBER QTY DESCRIPTION REMARKS 121-040 - SIGHT GLASS 1. 150-1388 1 HYDRAULIC RESERVOIR 3. 500-749 1 O-RING (211 D70) 2. 157-466 1 DRAIN PLUG (1-UNF, .375 ORF) 5. 322-289 1 BACKUP (BOLT-ON) 4. 116-322 AR BULK HOSE (1/2", SOLD PER 1") USE 1 @ 48" 7. 105-818 2 BOLT (1/4-NC X 1-1/2") 6. 110-411 1 BOLT-ON CLAMP (3/4", SET) 8. 111-021 1 BREATHER CAP (TANK) 9. 110-217 1 WORM CLAMP (7/16" TO 1") 10. 156-108 1 S/O COUPLER (08N-08H90) 11. 214-854 - TEMPERATURE SWITCH 153-606 1 STRAINER BASKET 153-607 1 FLANGE GASKET 153-594 1 GASKET, FILL NECK CAP 153-760 1 CAP 12.
364-567 1 FILL NECK SEE FOOTNOTE 2 153-761 1 FLANGE 107-781 6 HEX SCREW (#10-24 X 5/8) 15. 320-118 1 BATTERY COVER 14. 105-829 6 FLG LK BOLT (1/2-NC X 1") 13. 106-198 2 FLG LOCKNUT (1/2-NC, GD8) SEE FOOTNOTE 3 16. 106-387 6 FLG LOCKNUT (M10-1.50) 18. 320-116 1 BATTERY TRAY STEP 17. 300-9750 1 CRADLE WELDMENT 19. 107-001 8 FLG LK SCREW (M10-1.50 X 25mm) 24. 106-640 1 SCREW (M6-1.00 X 20mm, BUT SOC) 23. 313-910 1 RIGHT AIR DEFLECTOR 22. 107-778 2 SCREW (M8-1.25 X 30mm, BUT SOC) 117-463 AR LINER PAD (.25"THK) 21. 117-425 AR LINER PAD (.12"THK) 20. 106-558 3 CLIP NUT (M10-1.50) SEE FOOTNOTE 1 SEE FOOTNOTE 1 25. 106-574 1 CLIP NUT (M6-1.00) 26. 315-440 1 TOP MUD SHIELD 28.
157-987 1 S/O COUPLER (20S-16H90,04NF) 27. 105-003 1 FLG LOCKNUT (5/16-NC) 514-446 1 REDUCER (24S-20SF) 40. 300-4466 1 FUSE HOLDER MOUNT FOOTNOTES 1.ARRANGE LINER PADS IN AN EVEN PATTERN ON INTERIOR SURFACES OF THE SIDE PLATES, BOTTOM PLATE AND AND KICK PLATE. USE .12" THICK AND .25" THICK TO PROVIDE A SNUG FIT FOR THE TANK. APPLY AND ADJUST THE LINER PADS UNTIL THE LEAST MOVEMENT POSSIBLE HAS BEEN ACCOMPLISHED. ONCE FILLED THE TANK SHOULD NOT SHIFT. 2. ORIENT PADLOCK LUGS AWAY FROM STAIRWELL. 04 ID0201297 3. REFER TO PAGE "BATTERY INSTALLATION" FOR BATTERY INSTALLATION DETAILS.