147 147 HYDROSTATIC SHIFT REF NO. 1. 2. _3. 4, 5. 6. 7. 8. 9. 10. 11. 12, 13. 14, 15. 16. 17. 18. 19. 20. 21, 22. 23. PART NUMBER QTY DESCRIPTION 110-375. 1 KNOB (1/2-NC. YELLOW) 307-718 1 SHIFT ARM 125-488 2 FLANGE BUSHING (-875")) 106-992 12 FLG LK SCREW (M8-1.25 X 25mm) 106-386 8 FLG LOCKNUT (M8-1.25) 106-397 2 WASHER (M12, HARDENED) 125-609 2 BRONZE BUSHING (.750", FLG) 107-004 2 FLG LK SCREW (M12-1.75 X 45mm) 105-244AR WASHER (1/2) Bc 106-354 2 FLANGE NUT (M12-1.75) 106-447 1 JAM NUT (1/2-NF) 107-573. 1 JAMNUT (1/2-NFe LH) 110-290 1 ROD END (1/2-NF.
FM) 107-574 1 ROD END (1/2-NF, FM, LH) 105-506 2 COTTER PIN (3/16" X 1-1/2")| 117-019 1 COMPRESSION SPRING 306-762 1 SHIFT ROD 106-131 1 DOWEL PIN (.187X14.000) 2 306-666 1 SPRING ROD 307-568 1 SPRING MOUNT 307-567 1 SHIFT ARM 130-304 4 CONNECTOR LINK (#80) 307-580 1 BELLOW MOUNT 25. 26. 27. 28. 29. 118-074 118-087 106-266 307-563 107-002 110-217 REMARKS Bo 24, fo7-585] 1 BELLOW FOOTNOTES) 1. PLACE D 14 DUST SHIELD 1 DUST SHIELD 2 FLG NUT (M10-1.50)_ BS — SHIFT MOUNT 2 FLG LK SCREW (M10-1.50 X 30mm) 1 WORM CLAMP (7/16” TO 1”) WORM CLAMP (110-217) ON SHIFTER TQ SEE FOOTNOTE 1_ PREVENT DUST SHIELD (118-087) FROM SLIPPING DOWN. 806-354