OM3237 02/10 Operation - Section 32 Operator Cab and Controls Page 32-5 CENTER CONSOLE 1. Center Console 2. F-N-R Selector Switch 3. Hoist Control Lever 4. Ashtray 5. Cigarette Lighter 6. LH Window Control Switch 7. RH Window Control Switch 8. Engine Shutdown Switch 9. Override Switch 10. Blank - Not used on this truck 11. RSC ON/OFF Switch 12. Retarder Speed Control (RSC) Dial 13. Statex III Download Port 14. Engine Diagnostic Port (CENSE) 15. Modular Mining Port (Optional) 16. Passenger Seat (mounted on top of the right-hand portion of the console) 17. Engine Diagnostic Connectors (Centry) 18. Not Used 19. Data Store Button FIGURE 32-6.
CENTER CONSOLE TRUCK CONTROLS Hoist Control Lever F-N-R Selector Switch Hoist control lever (3, Figure 32-6) is a four-position, hand-operated lever located between the operator seat and the center console. F-N-R selector switch (2, Figure 32-6) is mounted on a console to the right of the operator's seat. It is a three- position switch that controls the forward-neutral- reverse motion of the truck. When the selector switch handle is in the center N position, it is in NEUTRAL. The handle must be in NEUTRAL to start the engine. Refer to Safety, Section 20, When Dumping, and Section 30, Dumping, for complete details concern- ing this control.
The operator can select forward drive by moving the handle forward. Reverse drive can be selected by moving the handle rearward. The truck must be stopped before the selector han- dle is moved to a forward or reverse drive position.