Industrial — Battery Charging

ELECTRICAL Battery Care Dirty or Loose Connections: improper connections may stop the flow of electrical power to and from the battery. Battery Charging Regular attention to the charging system will help prolong the service life of the batteries. Here are some common causes of battery failure: Except for using small trickle charges to maintain battery condition, you should have your vehicle's batteries charged by a qualified service facility. Overcharge: this condition results from improper voltage regulator adjustment. It results in overheating of the battery, warped plates, and evaporation of electrolyte. WARNING! Batteries can injure you severely.

They contain acid, produce poi- sonous and explosive gases, and supply levels of electric current high enough to cause burns. A spark or flame near a battery on charge may cause it to explode with great force. Never remove or tamper with the battery caps. Failure to comply may result in death, personal injury, equipment or property damage. Undercharge: the voltage regulator is malfunctioning, the drive belt is slipping, or your vehicle has undergone long periods of standing idle or short distance driving. These conditions result in battery plates becoming covered with a hard coating. 5 Vibration: loose battery hold-downs may cause battery plate failure.

To help reduce the risk of personal injuries, follow these guidelines carefully when recharging a battery: Short Circuits : these discharge the battery by draining electricity. Before attempting any service in the electrical installation, (03/17) Y53-6077-1B1 5-97