TIRES AND WHEEL Threads should be clean and dry. Do not lubricate wheel nuts or studs. Proper Torque and Sequence procedure will ensure that the wheel is drawn evenly against the hub. Torque each nut to the torque value listed in Wheel Cap Nut Torque on page 5-146. 5 Proper wheel torque can best be obtained on level ground. Install lug nuts and finger-tighten in the numerical sequence as shown below. See Nut Tightening Sequence for Hub Piloted Disc Wheels on page 5-148 or Nut Tightening Sequence for Stud Piloted Disc Wheels on page 5-148.
This (03/17) Y53-6077-1B1 5-147 WHEEL and NUT CONFIGURATION STUD SIZE TORQUE FOR INNER and OUTER CAP NUTS and RIM CLAMP NUTS Nm Lb-Ft Hub-Piloted Disc-Type Wheel w/Two Piece Flanged Cap Nuts: Steel or Aluminum Wheel PHP-10; Budd Uni-Mount-10; WDH-8 M22-1.5 610-680 450-500 Stud Backnuts (when used) 3/4-16 240-270 175-200 1-14 240-410 175-300 Cast Spoke Wheel Assembly 1/2” Dia. 5/8” Dia. 3/4” Dia. Rim Clamp Nut Torque 110-120 80-90 220-250 160-185 305-335 225-245