PREVENTIVE MAINTENANCE SCHEDULE 5 (03/17) Y53-6077-1B1 5-27 PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C D E Auxiliary transmis- sion Cotta Transfer Case TR2205 Fabco Transfer Case TC142/TC143/TC170/ TC270 Marmon-Harrington Transfer Case MVG2000/MVG2000SD Inspect: Check oil level; inspect for leaks and any visible damage. X Initial oil change: Drain oil while warm; flush case with gear oil-compatible fluid; clean magnetic drain plug; refill. Do not flush the case with any solvent. X X Change oil.
X Air Intake Air intake piping, mounting, and charge air cooler Check the system for broken pipes, leaks, joint integrity, cleanliness, and proper support (shown on page 5-109). X Air cleaner Replace the engine intake air cleaner element (shown on page 5-108). When required by air restriction indicator or required by the engine manufacturer's operator manual. Clutch Clutch linkage Lubricate. X Clutch release bearing Lubricate. X Inspect and adjust when necessary (no adjustment required for SOLO type clutches) X