LUBRICANT SPECIFICATIONS Pipe and Hose Clamps Use the following table for torque specifications to check pipe and hose clamps. Pipe and Hose Clamp Torque Values 5 (03/17) Y53-6077-1B1 5-43 APPLICATION APPROVED CLAMP TORQUE Nm Lb-In Radiator and Heat Exchanger Hoses Constant-Torque CT-L 10.2-12.5 90-110 Heater Hoses Constant Tension not required not required Air Intake Pipes Hi-Torque HTM-L 11.3-14.2 100-125 Plastic Air Intake Pipes Constant- Torque CT-L 4.5 40 (maximum) Charge Air Intake Hoses Flex Seal 667 7.9-11.3 70-100 B9296 6-7 50-60 Fuel, Oil & Water Heat Exchangers (for hoses less than 9/16 diameter) Miniature 3600L 1.1-1.7 10-15