CAB Washing the Exterior plated, and polished metal surfaces. Do not aim the water jet directly at door locks or latch. Tape the key holes to prevent water from seeping into the lock cylinders. Water in lock cylinders should be removed with compressed air. To prevent locks from freezing in the winter, squirt glycerin or lock deicer into the lock cylinders. CAUTION 1. Begin by spraying water over the dry surface to remove all loose dirt before applying the car wash and wax solution. 3. Rinse surfaces frequently while washing to flush away dirt that might scratch the finishes during the washing operation. ° Do not wash the vehicle in direct sunshine. 4.
Wipe everything dry with a chamois to avoid water spots. ° Do not spray water directly into the cab vents. ° To prevent water spotting, dry off the cosmetic surfaces with a clean cloth or chamois. 2. Using soapy water, wash the vehicle with a clean soft cloth or a soft brush made for automotive cleaning. 5. Remove road tar with an automotive type tar remover or mineral spirits. 5 ° Use cool or warm water and a mild, household type soap. Strong industrial detergents and cleaning agents are not recommended. 6. After cleaning and drying, apply a quality automotive wax.
° Do not use stiff brushes, paper towels, steel wool, or abrasive cleaning compounds because they will scratch painted, 5-74 Y53-6077-1B1 (03/17)