SAFETY - Standard Seat 1 Tether Belts To eliminate cinching, simply activate the Komfort-Latch ® device located on the seat belt webbing at the appropriate time: This vehicle may have an external tether belt installed with a seat, instead of the internal tethering device. Tether belts are designed to restrain the seat in the event of a sudden stop or an accident. Internal tether belts do not require adjustment. is in its most upward and forward position. Failure to comply may result in death or per- sonal injury. Adjust an external tether by either lengthening or shortening the strap. To lengthen it: 1. Adjust the seat to its proper driving position. 2. Latch the seat belt. 3.
If available, adjust the seat belt height adjuster to a comfortable driving position. 4. While seated appropriately, push the "on" button to engage the Komfort-Latch. 5. Learn forward in the seat until you hear a "click." 6. Return to normal driving position, and the Komfort-Latch maintains the preset amount of tension relief. Make sure that the tether belt is attached to the cab floor and seat frame. It should be routed through the buckle on each side. Often the attachments are made using a split-type hook. Make sure both halves of the hook are around the anchor bracket. 1. Turn the buckle to a right angle to the webbing. 2. Then pull the buckle. To shorten the tether, pull on the strap.
Komfort-Latch ® Feature WARNING! This device is designed to eliminate cinching and provide improved safety and comfort. Cinching is the condition where a belt becomes continually tighter around you during a rough, bouncy ride. The need for this feature increases with rough road conditions, particularly over long distances. Do not remove, modify, or replace the tether belt system with a different tether system. A failed or missing tether belt could allow the seat base to fully extend in the event of an accident. Failure to comply may result in death or personal injury. More information and video tutorials can be found at:
http://www.clicktugsnug.com/ To disengage the mechanism unbuckle the seat belt and then press the OFF button of the Komfort-Latch ® or tug on the shoulder strap. WARNING! WARNING! Failure to adjust external tether belts proper- ly can cause excessive movement of the seat in an accident. Tether belts should be adjusted so that they are taut when the seat Do not set the KomfortLatch ® with too much slack. Too much slack may reduce the effec- tiveness of the seat belt. Failure to comply may result in death or personal injury. 22 Y53-6096-1A1 (01/17)