Introduction and Safety Information INTRODUCTION This manual is part of a total service support program. FOS Manuals—reference Technical Manuals—machine Component service Manuals—component service Fundamentals of Service (FOS) Manuals cover basic theory of operation, fundamentals of troubleshooting, general maintenance, and basic types of failures and their causes. FOS Manuals are for training new personnel and for reference by experienced technicians. Technical Manuals are concise service guides for specific machines. Technical manuals are on-the-job guides containing only the vital information needed by an experienced service technician.
Component Technical Manuals are concise service guides for specific components. Component technical manuals are written as stand alone manuals covering multiple machine applications. FEATURES OF THIS TECHNICAL MANUAL John Deere ILLUSTRUCTION format emphasizing illustrations and concise instructions in easy-to-use modules. Emphasis on diagnosis, analysis, and testing so you can understand the problem and correct it. Diagnostic information presented with the most logical and easiest to isolate problems first to help you identify the majority of routine failures quickly. Step-by-step instructions for teardown and assembly.
Summary listing at the beginning of each group of all applicable specifications, wear tolerances, torque values, essential tools, and materials needed to do the job. An emphasis throughout on safety—so you do the job right without getting hurt. This technical manual was planned and written for you—an experienced service technician. Keep it in a permanent binder in the shop where it is handy. Refer to it when you need to know correct service procedures or specifications. AB6;RW5560 Litho in U.S.A. 210-05 053;INTRO3 071085 TM-1259 (Sep-87) 1U9;21005 201087