OPERATING THE ENGINE 14 2. Make sure the fuel cock is in the "OPEN" position. 4 . Place the PTO clutch control lever in "OFF" position and hydraulic control levers in "LOWEST" position. (1) Fuel cock (A) "CLOSE" (B) "OPEN" (1) PTO clutch control lever (2) Position control lever (3) Draft control lever "ON" "OFF" (A) "DOWN" 3. Place the shift levers in "NEUTRAL" position. 5. Set the throttle lever to about 1/2 way . (1) Hydraulic-shuttle shift lever (2) Main gear shift lever (N) "NEUTRAL POSITION " (1) Hand throttle lever (2) Foot throttle "INCREASE" "DECREASE"