. OPERATION EXPLANATION OF COMPONENTS TYPES OF WARNING to inform the operator. Following are the types of warning depending on the level of danger. REMARK For details of action codes "E03" to "E00", see "ACTION CODE DISPLAY (PAGE 3-9)". lamps light up. At the same time, the alarm item. 3 - 7 If an abnormality occurs on the machine, or if any switch or lever i operated accidently, the monito r display and buzzer give a warnin EMERGENCY STOP This warning is given if there is a serious failure that affects the norma l operation of the m achine or if the set ting is incorrect. The central warning lamp on th e monitor and the caution lamp for t he location of the abnorm alitylight up.
At the same time, the alarm buzzer sounds and action code "E03" is displayed on character display (1). CAUTION This warning is given if the coo The central warning lamp on t buzzer sounds and action cod e "E02" is displayed on character displa MISTAKEN OPERATION itch or lever is operated mistakenly. This warning is given if any sw itch or lever is operated mistakenly. The central warning lamp on th e monitor lights up and the alarm buzzer sounds at the sam e time. In addition , if the travel speed is too high, action code "E00" is displayed on character d isplay (1).
INSPECTION AND MAINTENAN CE cessary to inspect and maintain wear parts, or if it is necessary to check the oil or This warning is given if it is ne coolant level. The individual caution lamp on the monitor lights up. At the same time, action code "E01" is displayed on cha racter display (1). arning lamp does not light up and the alarm buzzer does not sound. With this warning, the central w arning lamp does not light up an d the a larm buzzer does CENTRAL WARNING LAM P This display (1) lights up if any emergency stop item, caution item or mistaken operation of any s witch or lever occurs. At the sam time the alarm buzzer sounds.
Check the display content and perform the specified action for th