. OPERATION EXPLANATION OF COMPONENTS START position Installed tire Max. speed [km/h (MPH)] Standard tire (17.5-25) 4.0 - 13.0 (2.5 - 8.1) Large-diameter tire (20.5-25) 4.4 - 14.3 (2.7 - 8.9) 3 - 32 This is the position to start the engine. Hold the key a t this positi on whil e cranking. Rele ase the key immediately after the engine ha s been started. The key will return to th e ON position when released. SPEED RANGE SEL Use this switch (2) to switch the speed rang Use 1st and 2nd fo r operations, and 3rd an d 4th for tr Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th REMARK When traveling at hi gh speed in 3rd or 4th (tr avel speed :
10 k m/h ( 6.2 MPH ) or more), even if the transmission s peed is shifted to 1st or 2 nd, the motor overrun pre vention sy stem will pr event t he transmission f rom shifting to 1st o r 2nd. In this case, the ce ntral warning lamp will light and the al arm buzzer will sound. At th "E00 "Overrun preventio n" are displayed on the c haracter d ispla y in tu rn for 3 The following meth ods can be used to canc el the alar m buzzer. Reduce speed s o that the travel speed is 9 km/h (5 .6 MPH) or less. I f the actual spee d range is 1st or 2n d, the alarm buzzer is canceled. d selector switch to 3rd or 4th.
Return the spee d selector switch to 3rd o VARIABLE SHIFT C ONTROL SWITCH When the speed ra nge is in 1st, it is possibl e to use th is dia l (3) t set the maximum s peed as desired. Turn the dial to the right to increase the setti ng; turn it to the left t decrease the settin g. The conditions for u se may differ according to the condition of th e road s urface