D 2011 General TD 2011 W 00-02-06 The measured compression pressure depends on the starting speed during the measuring process and the altitude of the engine installation site. Therefore, limit values cannot be determined exactly. The compression pressure measurement is only recommended as a reference measu - rement of all cylinders of an engine to each other. If more than 15% deviation has been determined, the cause should be deter - mined by disassembling the cylinder unit concerned. No. Kompression in bar Compression value in bar Pression en bar Dat. _________ 10 15 20 25 30 35 40 Zyl. 1 2 3 4 5 6 7 8 DBGM Made in Germany M OTO M ETER 6 © 45103-0 ●Remove the compression pressure tester.
© 47003-0 ●Remove the compression pressure tester and adapter (1). 1 © 47004-0 © 01/2009 OBJ_DOKU-23456-001.fm 3/6